Vi leverer stadig til flere i dental branchen. Nedenfor kan ses uddrag af vores produkter, men benyt også menuen til at navigere rundt til andre kategorier som f.eks. fræser eller savklinger.
Image | Description | |
---|---|---|
603380 |
Mandril med spændekæberMandril med udskiftelige spændekæber.
Fra 0,5 - 2,0 mm |
|
603400 |
Rundsavkliner til mandrilMål: Ø125x0,10x1 mm
|
|
603420 |
Rundsavkliner til mandrilRundsavklinge 19mm Ø
|
|
603450 |
Carbide discCoated, carbide edge.
Dia.: 22,5mm. |
|
603455 |
Korund discKorund.
Dia.: 22mm. Thikness: 0,6mm. |
|
603460 |
Cutting dicsØ 22 x 0,3mm.
|
|
603470 |
Diamant skæreskiveDiameter 22 Ø mm x 0,2 mm
med skaft. |
|
603475 |
Diamantskæreskive massiv.Diameter 22 Ø mm x 0,50 mm med skaft.
|
|
603072 |
Elipse WhiteCoarse
Ø 22 x 4 mm. 5.000-10.000 rpm. |
|
603070 |
Elipse BlackMedium
Ø 22 x 4 mm. 5.000-10.000 rpm. |
|
603068 |
Elipse BlueFine
Ø 22 x 4 mm. 5.000-10.000 rpm. |
|
603066 |
Elipse PinkX-fine
Ø 22 x 4 mm. 5.000-10.000 rpm. |
|
603086 |
Cylinder WhiteCoarse
Ø 12 mm. Length: 20 mm. 5.000-10.000 rpm. |
|
603084 |
Cylinder BlackMedium
Ø 12 mm. Length: 20 mm. 5.000-10.000 rpm. |
|
603082 |
Cylinder PinkX-fine
Ø 12 mm. Length: 20 mm. 5.000-10.000 rpm. |
|
603090 |
Cylinder WhiteCoarse.
Dia. 14 mm. Center 5mm. Length 25 mm. 5.000-10.000 rpm. |
|
603089 |
Cylinder BlackMedium.
Dia. 14 mm. Center 5mm. Length 25 mm. 5.000-10.000 rpm. |
|
603087 |
Cylinder BlueFine.
Dia. 14 mm. Center 5mm. Length 25 mm. 5.000-10.000 rpm. |
|
603088 |
Cylinder PinkX-fine.
Dia. 14 mm. Center 5 mm. Length 25 mm. 5.000-10.000 rpm. |
|
633590 |
Ceramic-bonded diamond abrasive grinderEVE DIADUR medium. For trimming and removing ceramics and metals.
10.000 - 15.000 rpm. |
|
Silikonepoler cylinderCylinder Ø 7
Længde: 20 mm. 5.000-10.000 rpm. |
||
603080 |
Cylinder WhiteCoarse
Ø 7 mm. Length: 20 mm. 5.000-10.000 rpm. |
|
603078 |
Cylinder BlackMedium
Ø 7 mm. Length: 20 mm. 5.000-10.000 rpm. |
|
603074 |
Cylinder BlueFine
Ø 7 mm. Length: 20 mm. 5.000-10.000 rpm. |
|
603076 |
Cylinder PinkX-fine
Ø 7 mm. Length: 20 mm. 5.000-10.000 rpm. |
|
603064 |
Point Cylinder BlackMedium
Ø 6 x 24 mm. 5.000-10.000 rpm. |
|
603062 |
Point Cylinder BlueFine
Ø 6 x 24 mm. 5.000-10.000 rpm. |
|
603060 |
Spids Cylinder PinkX-fine
Ø 6 x 24 mm. 5.000-10.000 rpm. |
|
603054 |
Wheel WhiteCoarse
Ø 17 x 6 mm. 5.000-10.000 rpm. |
|
603052 |
Wheel BlackMedium
Ø 17 x 6 mm. 5.000-10.000 rpm. |
|
603059 |
Wheel WhiteCoarse
Ø 22 x 6 mm. 5.000-10.000 rpm. |
|
603058 |
Wheel BlackMedium
Ø 22 x 6 mm. 5.000-10.000 rpm. |
|
603056 |
Wheel BlueFine
Ø 22 x 6 mm. 5.000-10.000 rpm. |
|
603050 |
Wheel pinkEkstra fine
Ø 17 x 2,5 mm. 5.000-10.000 rpm. |
|
602830 |
Wheel brush mountedSoft yarn
Dia. approx. 22 mm. |
|
602900 |
Wheel brush unmountedSoft yarn
Dia. approx. 22 mm. |
|
602936 |
Cotton Wheel mountedDia. approx. 22 mm.
|
|
602935 |
Cotton Wheel unmountedDia. approx. 22 mm.
|
|
602800 |
Wheel brush mountedSoft goathair brush
Dia. approx. 22 mm. |
|
602870 |
Wheel brush unmountedSoft goathair brush
Dia. approx. 22 mm. |
|
603110 |
Elipse coarseØ 22 x 4 mm.
5.000-10.000 rpm. Blå |
|
603108 |
Elipse mediumØ 22 x 4 mm.
5.000-10.000 rpm. Grå |
|
603107 |
Elipse fineØ 22 x 4 mm.
5.000-10.000 rpm. Brun |
|
603106 |
Elipse x-fine
Ø 22 x 4 mm.
5.000-10.000 rpm. Grøn |
|
603131 |
Elipse Ultra finØ 22
Brede: 4 mm. 5.000-10.000 rpm. grå grøn Eveflex 922 |
|
633592 |
Ceramic-bonded disamond abrasive grinderEVE DIADUR coarse. For trimming and removing ceramics and metals.
10.000 - 15.000 rpm. |
|
602990 |
Pencil brush White5 x 5 mm.
Length total 60 mm. |
|
602950 |
Cup brush white10 x 10 mm.
Length total 60 mm. |
|
633580 |
Ceramic-bonded diamond abrasive grinderEVE DIADUR medium. For trimming and removing ceramics and metals.
10.000 - 15.000 rpm. |
|
603104 |
Wheel coarseØ 22 x 3 mm
5.000-10.000 rpm. Blå |
|
603102 |
Wheel mediumØ 22 x 3 mm
5.000-10.000 rpm. Grå |
|
603101 |
Wheel fineØ 22 x 3 mm
5.000-10.000 rpm. Brun |
|
603100 |
Wheel x-fine
Ø 22 x 3 mm.
5.000-10.000 rpm. Grøn |
|
603133 |
Skive Ultra finØ 22
Brede: 3 mm. 5.000-10.000 rpm. grå grøn Eveflex 901 |
|
602820 |
Wheel brush mountedStiff, black.
Dia. approx. 22 mm. |
|
602890 |
Wheel brush unmountedStiff, black
Dia. approx. 22 mm. |
|
603142 |
Airflex fine
Ø 22 x 3 mm.
5.000-10.000 rpm. Brun |
|
603146 |
Airflex coarseØ 22 x 3 mm.
5.000-10.000 rpm. Blå |
|
633582 |
Ceramic-bonded diamond abrasive grinderEVE DIADUR coarse. For trimming and removing ceramics and metals.
10.000 - 15.000 rpm. |
|
603135 |
Elipse softPackage of 10 pieces.
Ø 22 5.000-10.000 rpm. Meisinger |
|
603115 |
Wheel softPackage of 10 pieces.
Ø 22 Width: 3,4 mm. 5.000-10.000 rpm. Meisinger |
|
603000 |
Pencil brush stiff black5 x 5 mm.
Length total 60 mm. |
|
602960 |
Cup brush stiff black15 x 10 mm.
Length total 50 mm. |
|
603192 |
Diapol ElipseFor ceramics and metal.
Ø 26 x 2 mm. 5.000-10.000 rpm. |
|
603193 |
Diapol Elipse coarse
For ceramics and metal.
Ø 26 x 2 mm. 5.000-10.000 rpm. Blå |
|
603194 |
Diapol Elipse fineFor ceramics and metal.
Ø 26 x 2 mm. 5.000-10.000 rpm. Lyserød |
|
603195 |
Diapol Elipse X-fineFor ceramics and metal.
Ø 26 x 2 mm. 5.000-10.000 rpm. lysegrå |
|
602810 |
Wheel brush mountedStiff.
Dia. approx. 22 mm. |
|
602880 |
Wheel brush unmountedStiff.
Dia. approx. 22 mm. |
|
603030 |
FeltcylinderØ 10
Shaft: Ø 2,34 mm. |
|
603040 |
feltcylinder pointedØ 6
Shaft: Ø 2,34 mm. |
|
603121 |
Large cone coarse
Ø 7
Length: 15 mm. 5.000-12.000 rpm. Blå |
|
603120 |
Large cone medium
Ø 7
Length: 15 mm. 5.000-12.000 rpm. Grå |
|
603119 |
Large cone fine
Ø 7
Length: 15 mm. 5.000-12.000 rpm. Brun |
|
603118 |
Large cone x-fine
Ø 7
Length: 15 mm. 5.000-12.000 rpm. Grøn |
|
603137 |
Stor Kegle Ultra finØ 7
Længde: 15 mm. 5.000-12.000 rpm. Grå grøn Eveflex 907 |
|
602092 |
Felt discØ 23
thickness: 5 mm. Shaft: Ø 2,34 mm. |
|
603129 |
Small cone coarseØ 4,3 x 12 mm.
5.000-12.000 rpm. Blå |
|
603128 |
Small cone medium
Ø 4,3 x 12 mm.
5.000-12.000 rpm. Grå |
|
603127 |
Small cone fine
Ø 4,3 x 12 mm.
5.000-12.000 rpm. Brun |
|
603126 |
Small cone x-fine
Ø 4,3 x 12 mm.
5.000-12.000 rpm. Grøn |
|
603139 |
Lille Kegle Ultra finØ 4,3
Længde: 12 mm. 5.000-12.000 rpm. Grå grøn Eveflex 904 |
|
602093 |
Felt lensØ 23
Shaft: Ø 2,34 mm. |
|
602094 |
Felt elipse unmountedØ 23
Shaft: Ø 2,34 mm. |
|
603125 |
Point cylinder coarseØ 5
Length: 16 mm. 5.000-12.000 rpm. Blå |
|
603124 |
Point cylinder medium
Ø 5
Length: 16 mm. 5.000-12.000 rpm. Grå |
|
603123 |
Point cylinder fineØ 5
Length: 16 mm. 5.000-12.000 rpm. Brun |
|
603122 |
Point cylinder x-fineØ 5
Lenght: 16 mm. 5.000-12.000 rpm. Grøn |
|
603141 |
Spids Cylinder Ultra finØ 5
Lænde: 16 mm. 5.000-12.000 rpm. Grå grøn Eveflex 908 |
|
645100 |
Flame coarse
Ø 5,5
Length: 18 mm. 5.000-12.000 rpm. Blå |
|
645102 |
Flame medium
Ø 5,5
Length: 18 mm. 5.000-12.000 rpm. Grå |
|
645104 |
Flame fine
Ø 5,5
Length: 18 mm. 5.000-12.000 rpm. Brun |
|
645106 |
Flame x-fine
Ø 5,5
Length: 18 mm. 5.000-12.000 rpm. Grøn |
|
603143 |
Flamme form Ultra fin
Ø 5,5
Lænde: 18 mm. 5.000-12.000 rpm. Grå grøn Eveflex 906 |
|
602940 |
Chamois leather discDia. approx. 22 mm.
|
|
602920 |
Brass wheel brush unmountedDia. approx. 22 mm.
|
|
602850 |
Brass wheel brush mountedDia. approx. 22 mm.
|
|
603010 |
Pencil brush brass5 x 5 mm.
Length total 60 mm. |
|
602970 |
Cup brush brass10 x 10 mm.
Length total 60 mm. |
|
602930 |
Steel wheel brush unmountedDia. approx. 22 mm.
|
|
602931 |
Steel wheel brush mountedDia. approx. 22 mm.
|
|
603116 |
Cylinder coarseØ 10
Length: 12 mm. 5.000-10.000 rpm. Blue |
|
603114 |
Cylinder medium
Ø 10
Length: 12 mm. 5.000-10.000 rpm. Gray |
|
603113 |
Cylinder fine
Ø 10
Length: 12 mm. 5.000-10.000 rpm. Brown |
|
603112 |
Cylinder x-fine
Ø 10
Length: 12 mm. 5.000-10.000 rpm. Green |
|
603144 |
Cylinder Ultra finØ 10
Lænde: 12 mm. 5.000-10.000 rpm. Grå grøn Eveflex 910 |
|
603020 |
Pencil brush steel5 x 5 mm.
Length: 60 mm. |
|
602980 |
Cup brush steel10 x 10 mm.
Length 60 mm. |
|
645050 |
Cylinder fineFor polishing of platinum, titanium and other metals
Ø 14 Length: 12 mm. 5.000-10.000 rpm. |
|
645040 |
Cylinder mediumFor polishing of platinum, titanium and other metals.
Ø 14 Length: 12 mm. 5.000-10.000 rpm. |
|
645000 |
Cylinder coarse
Ø 14
Length: 12 mm. 5.000-10.000 rpm. Blå |
|
645010 |
Cylinder medium
Ø 14
Length: 12 mm. 5.000-10.000 rpm. Grå |
|
645020 |
Cylinder Fine
Ø 14
Length: 12 mm. 5.000-10.000 rpm. Brun |
|
645030 |
Cylinder x-fineØ 14
Length: 12 mm. 5.000-10.000 rpm. Grøn |
|
603145 |
Cylinder Ultra finØ 14
Lænde: 12 mm. 5.000-10.000 rpm. Grå grøn Eveflex 920 |
|
602840 |
Polifix Rød lSemi coarse
|
|
602845 |
Polifix Grøn llCoarse
|
|
602910 |
Abrasive Wheel unmountedRed texturing wheel.
For satin finish. Dia. ca. 22 mm. |
|
601095 |
3M radialØ 14,3mm
Fin (6 micron) Lysebrun Anbefalet hastighed: 15.000 - 20.000 omr/m Max: 30.000 omr/m Vi anbefaler at man bruger 3 stk. sammen. |
|
601091 |
3M radialØ 14,3mm
Grov (korn 120) hvid Anbefalet hastighed: 10.000 - 20.000 omr/m Max: 30.000 omr/m Vi anbefaler at man bruger 3 stk. sammen. |
|
601092 |
3M radialØ 14,3mm
Grov (korn 220) Mørkebrun Anbefalet hastighed: 10.000 - 20.000 omr/m Max: 30.000 omr/m Vi anbefaler at man bruger 3 stk. sammen. |
|
601093 |
3M radialØ 14,3mm
Mellem (korn 400) Blå Anbefalet hastighed: 5.000 - 18.000 omr/m Max: 30.000 omr/m Vi anbefaler at man bruger 3 stk. sammen. |
|
601094 |
3M radialØ 14,3mm
Pimpsten Lyserød Anbefalet hastighed: 5.000 - 18.000 omr/m Max: 30.000 omr/m Vi anbefaler at man bruger 3 stk. sammen. |
|
601096 |
3M radialØ 14,3mm
Super fin (1 micron) Grøn Anbefalet hastighed: 15.000 - 20.000 omr/m Max: 30.000 omr/m Vi anbefaler at man bruger 3 stk. sammen. |
|
601001 |
3M radialØ 19
X-coarse (grit 80) Gul |
|
601002 |
3M radialØ 19
Coarse (grit 220) Mørkebrun |
|
601003 |
3M radialØ 19
Medium (grit 400) Blå |
|
601004 |
3M radialØ 19
Pumic polisher Lyserød |
|
601006 |
3M radialØ 19
Fine (6 micron) Lysebrun |
|
601007 |
3M radialØ 19
Super fine (1 micron) Grøn |
|
603134 |
Pin, medium
Ø 2
Length: 20 mm. 10.000-15.000 rpm. Grå |
|
603132 |
Pin, fine
Ø 2
Length: 20 mm. 10.000-15.000 rpm. Brun |
|
603130 |
Pin, x-fine
Ø 2
Length: 20 mm. 10.000-15.000 rpm. Grøn |
|
603330 |
Magnum sanding discsFine
Ø 23 I æsker af 100 stk. |
|
603340 |
Magnum sanding discsMedium
Ø 23 I æsker af 100 stk. |
|
603350 |
Magnum sanding discsCoarse
Ø 23 I æsker af 100 stk. |
|
603140 |
Pin medium
Ø 3
Length: 20 mm. 10.000-15.000 rpm. Grå |
|
603138 |
Pin, fine
Ø 3
Length: 20 mm. 10.000-15.000 rpm. Brun |
|
603136 |
Pin, x-fine
Ø 3
Length: 20 mm. 10.000-15.000 rpm. Grøn |
|
603175 |
Clip on mandrelFor Magnum sanding discs.
|
|
603160 |
MandrelFor Ø 2 pins
Max: 15.000 rpm. |
|
603162 |
MandrelFor Ø 3 pins
Max: 15.000 rpm. |
|
603360 |
Split mandrelØ 3,1 mm.
Shaft Ø 2,34 |
|
603098 |
Pin, green6 x 25 mm.
|
|
603096 |
Pin, reed6 x 25 mm.
|
|
603365 |
Split mandrelØ 2,34 mm.
|
|
603152 |
Contouring and dressing tool for polishers.Diamond.
25 x 12 x 6 mm. |
|
603370 |
Split mandrelØ 4,5 mm.
Shaft Ø 2,34 mm. |
|
603150 |
Contouring and dressing tool for polishers.Corundum.
33 x 20 mm. |
|
603190 |
Treaded mandrelFor rubber and silicone polishers.
|
|
603154 |
Platinum Polishing set9-piece.
|
|
634320 |
Adapter mandrel in wood.For spindles.
|
|
603170 |
Mandrel for discs and and wheelsØ 5
Shaft: Ø 2,34 mm. Max: 15.000 rpm. |
|
603180 |
Mandrel for discs and and wheelsØ 8
Shaft: Ø 2,34 mm. Max: 15.000 rpm. |
|
603176 |
Mandril til gummipoler og smergelskiverØ 5
2,34 mm skaft i forløb. Max: 15.000 rpm. |
Frits Pedersen · Haraldshus, Vermundsgade 38B, st. th. · 2100 København Ø · Denmark Tel.: +45 35 43 11 11 · Fax: +45 35 43 33 44 · fp@frits.dk · www.frits.dk © 1996-2024 · http://www.frits.dk/varktoj.asp · 28-03-2024 14:57:26 |