Image | Description |
|
|
613424 |
Tungsten carbide cutter
Shape: cone square, rounded.
X-cut, medium.
For non precious alloys, acrylics.
Ø 1,4 mm.
Meisinger: HM 23MG 014
|
|
|
613428 |
Tungsten carbide cutter
Shape: cone square, rounded.
X-cut, medium.
For non precious alloys, acrylics.
Ø 2,3 mm.
Meisinger: HM 23MG 023
|
|
|
613481 |
Tungsten carbide cutter
Shape: flame, rounded.
X-cut, medium.
For non precious alloys, acrylics.
Ø 2,3 mm.
Meisinger: HM 73MG 023
|
|
|
613482 |
Tungsten carbide cutter
Shape: flame, rounded.
Special toothing for titanium, ultra fine.
For final work on titanium and titanium alloys prior to polishing.
Ø 2,3 mm.
Meisinger: HM 73UT 023
|
|
|
613410 |
Tungsten carbide cutter
Shape: round.
Ø 2,5 mm.
Single cut.
For laboratory.
Max rpm: 50.000
Meisinger: HM 71 025
|
613412 |
Tungsten carbide cutter
Shape: round.
Ø 3,1 mm.
Single cut.
For laboratory.
Max rpm: 50.000
Meisinger: HM 71 031
|
613414 |
Tungsten carbide cutter
Shape: round.
Ø 4,0 mm.
Single cut.
For laboratory.
Max rpm: 50.000
Meisinger: HM 71 040
|
613416 |
Tungsten carbide cutter
Shape: round.
Ø 5,0 mm.
Single cut.
For laboratory.
Max rpm: 50.000
Meisinger: HM 71 050
|
|
|
613418 |
Tungsten carbide cutter
Shape: round.
Ø 5,0 mm.
X-cut, medium.
For non precious alloys, acrylics.
Max rpm: 40.000
Meisinger: HM 71GX 050
|
|
|
613455 |
Tungsten carbide cutter
Shape: flame, rounded.
X-cut, coarse.
For acrylic and plaster.
Ø 6,0 mm.
Meisinger: HM 251HX 060
|
|
|
613473 |
Tungsten carbide cutter
Shape: flame, rounded.
For acrylic and plaster.
X-cut, medium.
Ø 4,0 mm.
Meisinger: HM 250GM 040
|
|
|
613471 |
Tungsten carbide cutter
Shape: flame, rounded.
For trimming of hard materials and for obtaining especially smooth surfaces.
Ø 6 mm.
Plain cut, medium.
Meisinger: HM 251 060
|
613472 |
Tungsten carbide cutter
Shape: flame, rounded.
For trimming of hard materials and for obtaining especially smooth surfaces.
Ø 7 mm.
Plain cut, medium.
Meisinger: HM 251 070
|
|
|
613461 |
Tungsten carbide cutter
Shape: flame, rounded.
For acrylic and plaster.
Ø 6,0 mm.
X-cut, medium.
Meisinger: HM 251GM 060
|
|
|
613490 |
Tungsten carbide cutter
Shape: flame, rounded.
For trimming on all alloys and hard acrylics.
Ø 6 mm.
Cut length: 14,7 mm.
Cross cut.
Max rpm: 30.000
Meisinger: HM 251FQ 060
|
|
|
613470 |
Tungsten carbide cutter
Shape: flame, rounded.
For trimmingof hard alloys, acrylics and ceramics.
Ø 4 mm.
Cut length: 9,3 mm.
X-cut, fine.
Max rpm: 50.000
Meisinger: HM 251FX 040
|
613480 |
Tungsten carbide cutter
Shape: flame, rounded.
For trimmingof hard alloys, acrylics and ceramics.
X-cut, fine.
Ø 6 mm.
Cut length: 14,7 mm.
X-cut, fine.
Max rpm: 30.000
Meisinger: HM 251FX 060
|
|
|
613520 |
Tungsten carbide cutter
Shape: point, rounded
For trimming of hard materials and for obtaining especially smooth surfaces.
Ø 6 mm.
Cut length: 14,7 mm.
Plain cut, medium.
Max rpm: 30.000
Meisinger: HM 416 060
|
|
|
613521 |
Tungsten carbide cutter
Shape: point, rounded.
For trimming non-precious alloys and acrylics.
Cut length: 14,7 mm.
Ø 6 mm.
Plain cut, medium.
Meisinger: HM 416GX 060
|
|
|
613510 |
Tungsten carbide cutter
Shape: cone square, rounded.
For precious alloys.
Ø 6 mm.
Cut length: 12,7 mm.
Plain cut, medium.
Max rpm: 30.000
Meisinger: HM 79 060
|
|
|
613440 |
Tungsten carbide cutter
Shape: cone square, rounded.
For fine trimming of hard alloys, acrylics and ceramics.
Ø 4 mm.
Cut Length: 14,2 mm.
X-cut, fine
Max rpm: 50.000
Meisinger: HM 79FX 040
|
613450 |
Tungsten carbide cutter
Shape: cone square, rounded.
For fine trimming of hard alloys, acrylics and ceramics.
Ø 4,5 mm.
Cut Length: 12,7 mm.
X-cut, fine
Max rpm: 50.000
Meisinger: HM 79FX 045
|
613460 |
Tungsten carbide cutter
Shape: cone square, rounded.
For fine trimming of hard alloys, acrylics and ceramics.
Ø 6 mm.
Cut Length: 12,7 mm.
X-cut, fine
Max rpm:30.000
Meisinger: HM 79FX 060
|
|
|
613477 |
Tungsten carbide cutter
Shape: Conical wax milling cutters, rounded end.
Ø 2,3mm.
Meisinger: HM 496KR 023
|
613478 |
Tungsten carbide cutter
Shape: Conical wax milling cutters, rounded end.
Ø 3,1mm.
Meisinger: HM 496KR 031
|
613479 |
Tungsten carbide cutter
Shape: Conical wax milling cutters, rounded end.
Ø 4,0mm.
Meisinger: HM 496KR 040
|
|
|
613451 |
Tungsten carbide cutter
Shape: cone, rounded.
For trimming of acrylics and plaster.
Ø 6,0 mm.
X-cut, coarse.
Meisinger: HM 79HX 060
|
|
|
613452 |
Tungsten carbide cutter
Shape: cone, rounded.
For trimming of acrylics and plaster.
Ø 7,0 mm.
X-cut, coarse.
Meisinger: HM 79HX 070
|
|
|
613454 |
Tungsten carbide cutter
Shape: cone, rounded.
X-cut, medium.
For non precious alloys, acrylics.
Ø 6,0mm.
Cut length: 12,7mm.
Meisinger: HM 79GX 060
|
|
|
613421 |
Tungsten carbide cutter
Shape: point, rounded.
X-cut, medium.
For non precious alloys, acrylics.
Cut length: 11,5mm.
Meisinger: HM 138GX
|
|
|
613530 |
Tungsten carbide cutter
Shape: point, rounded.
X-cut, medium.
For precious alloys and acrylics.
Cut length: 4,2mm.
Meisinger: HM 23SRX 010
|
|
|
613422 |
Tungsten carbide cutter
Shape: cylindrical pointed.
X-cut, medium.
For non precious alloys, acrylics.
Ø 23mm.
Cut length: 14mm.
Meisinger: HM 487 GX 023
|
|
|
613423 |
Tungsten carbide cutter
Shape: cylindrical point rounded.
Special toothing for titanium, medium.
For speedy work on titanium and titanium alloys.
Ø 2,3mm.
Cut length: 14mm.
Meisinger: HM 486 GT 023
|
|
|
613441 |
Tungsten carbide cutter
Shape: cylindrical point rounded.
Special toothing for titanium, ultra fine.
For final work on titanium and titanium alloys prior to polishing.
Ø 2,3mm.
Cut length: 14mm.
Meisinger: HM 486UT 023
|
|
|
613442 |
Tungsten carbide cutter
Shape: cylindrical point rounded.
Special toothing for titanium, extra fine.
For extra fine, difficult work on titanium and titanium alloys.
Ø 2,3mm.
Cut length: 14mm.
Meisinger: HM 486ET 023
|
|
|
613443 |
Tungsten carbide cutter
Shape: cylindrical pointed.
X-cut, medium.
For non precious alloys, acrylics.
Cut length: 14mm.
Ø 2,3 mm.
Meisinger: HM 487GX 023
|
|
|
613474 |
Tungsten carbide cutter
Shape: cylinder, rounded end.
For precious alloys.
Plain cut, medium.
Ø 6mm.
Meisinger: HM 72 060
|
|
|
613475 |
Tungsten carbide cutter
Shape: rounded cylinder.
For precious alloys.
Ø 6 mm.
Plain cut, medium.
Max rpm: 30.000
Meisinger: HM 73 060
|
|
|
613476 |
Tungsten carbide cutter
Shape: cylinder.
For trimming of non-precious alloys and acrylics.
X-cut, medium.
Ø 40mm.
Meisinger: HM 296GX 040
|
|
|
613425 |
Tungsten carbide cutter
Shape: cylinder square,
cross cut.
Ø 2,1mm.
Shank: Ø 2,3mm.
Cut length: 5,1 mm.
Max rpm: 50.000
Meisinger: HM 31 021
|
613426 |
Tungsten carbide cutter
Shape: cylinder square,
cross cut.
Ø 2,3mm.
Shank: Ø 2,3mm.
Cut length: 5,1 mm.
Max rpm: 50.000
Meisinger: HM 31 023
|
|
|
613400 |
Tungsten carbide cutter
Shape: cylindrical, side and end cutting.
Plain cut, medium.
Ø 6,0 mm.
Cut length: 13,7 mm.
For effective triming of hard meterials and for obtaining especially smoth surfaces.
Max rpm: 30.000
Meisinger: HM 21 060
|
|
|
613456 |
Tungsten carbide cutter
Shape: cylindrical, side and end cutting.
Ø 6mm.
X-cut, fine.
Max rpm: 30.000
Meisinger: HM 175FX 060
|
|
|
613560 |
Tungsten carbide
Spear drill.
Overall length: 130
Ø 0,6
Max rpm: 30.000
Meisinger: HM 202 006
|
613565 |
Platbor carbide Meisinger
Spear drill.
Overall length: 130
Ø 0,7
Max rpm: 30.000
Meisinger: HM 202 007
|
613570 |
Platbor carbide Meisinger
Spear drill.
Overall length: 130
Ø 0,8
Max rpm: 30.000
Meisinger: HM 202 008
|
|
|
613540 |
Typhoon cutter
Shape: flame.
Ø 7,5mm.
Cut length: 18,5mm.
|
|
|
613541 |
Typhoon cutter
Shape: cylindrical.
Ø 8mm.
Cut length: 13,5mm.
|
|
|
613542 |
Typhoon cutter
Shape: cylindrical, rounded end.
Ø 8mm.
Cut length: 15,5mm.
|
|
|
613543 |
Typhoon cutter
Shape: flame.
Ø 9,5mm.
Cut length: 15mm.
|